Grapple or tree shear: how to choose
Start from the job: moving wood that is already cut, felling small trees or sorting materials.
1. Log grapples
They load logs onto trailers, build piles and move firewood and brushwood. They carry 400 to 2,500 kg with openings from about 1 to 1.6 m and are also available in Hardox, which resists wear better.
2. Tree shears
They cut shrubs and small trees up to 10–13 cm at the base and hold them with the built-in grapple: you fell, move and stack with one attachment. They are made entirely of Hardox with a hardened steel blade and work at higher pressures than grapples, from 150 to 260 bar.
3. Sorting grapples
They handle stones, timber, scrap and materials to be sorted: useful when, besides wood, you need to clear ground of stones and debris. They carry 150 to 250 kg.
4. Hydraulic rotators
The rotator turns the grapple or shear through 360° so you can set the load down where you want without moving the machine. It is chosen by capacity, from 1,000 to 4,500 kg, and connection: pin-mounted, flanged or for a quick coupler. It can also be added later.
5. Which machine
Grapples and shears fit forestry cranes, front loaders and mini excavators. What counts is the weight the machine can carry at the end of the arm and its hydraulics: check the required pressure, oil flow and machine class on each product page.
| Type | Capacity or cut | Opening | Pressure |
|---|---|---|---|
| Light log grapple | 400–600 kg | about 1.0 m | 80–120 bar |
| Medium log grapple | 1,000 kg | about 1.1 m | 80–120 bar |
| Heavy log grapple | 2,000–2,500 kg | 1.3–1.6 m | 120–220 bar |
| Tree shear | cut 9–13 cm | 54–65 cm | 150–260 bar |
| Sorting grapple | 150–250 kg | 0.9–1.2 m | 80–120 bar |
Grapple or shear: which do I need?
If you need to move and load wood that is already cut, a grapple. If you need to fell shrubs and small trees and then stack them, a shear, which cuts and holds. Those who do both jobs often use both on the same machine.
Can they be fitted to a forestry crane?
Yes, grapples and shears also fit forestry cranes and loaders as well as mini excavators, as long as the hydraulics deliver the required pressure and flow and the connection is compatible.
Why choose Hardox?
Hardox steel better resists wear and twisting: the light grapple in Hardox carries 600 kg instead of 400 kg with just a few extra kilos, and the shears are made entirely of Hardox.
Can I add the rotator later?
Yes: rotators and link brackets are also available separately. The rotator needs an extra hydraulic function on the machine.
Where can I find the mini excavator versions?
In the mini excavator section you will find log grapples and tree shears organised by machine weight, including the grapples dedicated to DELEKS mini excavators.
Frequently asked questions
Which log grapple do I need for a 1.5 or 1.8-tonne mini digger?
The 400 and 600 kg grapples, weighing 52 to 73 kg (115 to 160 lb), for machines from 1.5 to 3 tonnes, on 18-22 l/min at 80-120 bar. For machines from 1.8 to 3.5 tonnes there is the 1,000 kg grapple, from 4 to 8 tonnes the 2,000 kg one, from 5 to 10 tonnes the 2,500 kg one. With the make and model we confirm capacity and hitch.
Can I fit a log grapple to a tractor?
Yes, to the front loader or the forestry crane of the tractor, with a double-acting hydraulic line to open and close the grapple and, if fitted, the rotator. On a crane the grapple hangs from the rotator; on a front loader it is fixed to the loader's hitch.
What is the difference between a log grapple and a selector grab?
The log grapple has long, narrow tines to grip logs, branches and bundles from 400 to 2,500 kg; the selector grab has two wide, closed shells, carries 150 to 250 kg and picks up stones, rubble and loose material as well as timber, on mini diggers from 0.8 to 3.5 tonnes.
Do I need a rotator?
Not always: the grapples come with and without. With the rotator the grapple turns through 360° and you set the log down where you want without moving the machine, useful on a crane and for stacking. Rotators are chosen by capacity, from 1,000 to 4,500 kg, adding the weight of the grapple to the load.
What does the tree shear cut?
Shrubs and small trees up to 10-13 cm (4-5") in diameter, with a hardened steel blade; the built-in grapple holds the cut tree so you move and stack it without it falling. They fit mini diggers and mini excavators from 1 to 3 tonnes and forestry loaders.
How many litres per minute do the grapples need?
18 to 22 l/min at 80-120 bar for the grapples up to 1,000 kg, 120-150 bar for the 2,000 kg ones, 25-50 l/min at 150-220 bar for the 2,500 kg grapple. The figure for the auxiliary line is in the machine's manual.
Are the grapples and shears made of Hardox?
The shears are entirely Hardox 450 with a through-hardened blade; the grapples are also available in a Hardox version, more wear-resistant for the same weight.
How much does forestry equipment cost and what warranty does it have?
Prices are on each product page, with the pallet delivery cost shown in the basket. Two-year warranty on defects in materials and workmanship; blades, tines and wear parts excluded.
Products marked with the Italian flag and the Made in Italy indication are designed and manufactured predominantly in Italy; products without these indications are essentially manufactured abroad.
Deutsch