Filter by sub-categories
How to choose a tractor flail mower
The choice starts with the tractor's power and weight. The light series, 80 to 165 cm (31 to 65 in) and 105 to 245 kg (231 to 540 lb), works with tractors from 12 to 45 hp and is the flail mower for compact tractors on smallholdings, gardens and vineyards. The medium series, 90 to 200 cm (35 to 79 in) and 285 to 428 kg (628 to 944 lb), needs 25 to 90 hp and has a reinforced frame and 820 g (29 oz) hammers for prunings and branches up to 5 cm (2 in). The heavy-duty series, 150 to 260 cm (59 to 102 in) and 480 to 900 kg (1,058 to 1,984 lb), works with tractors from 50 to 130 hp and includes pruning shredders, stalk choppers and the forestry mulcher. The working width should be 15 to 20 cm (6 to 8 in) more than the tractor's outer track, to cover the wheel marks; the implement's weight must stay within the linkage's lift capacity.
Hammers or Y-blades
Hammers are the all-round flail: they shred long grass, reeds, prunings and branches, with weights from 330 g (11.6 oz) in the light series up to 1,100 to 1,600 g (39 to 56 oz) in the heavy-duty and forestry models. Y-blades are lighter, draw less power and leave a finer cut on grass, but do not stand up to branches: they equip the heads for the lighter mini diggers and, as an alternative to hammers, some heavy-duty mowers. The maximum cutting diameter runs from 1 cm (0.4 in) for the finger bar hedge cutters to 8 cm (3.1 in) for the heavy-duty flail mowers and 15 cm (6 in) for the tractor forestry mulcher.
Verge mowers, reversible mowers, finishing mowers and drum mowers
For ditches, banks and roadsides there is the verge flail mower, 100 to 220 cm (39 to 87 in), with hydraulic offset and an arm that tilts the head from +90° to -60°. The reversible flail mower, 120 to 220 cm (47 to 87 in), has a three-point linkage on either side, double or movable, and mounts behind or in front of the tractor, on the front linkage. For lawns, parks and orchards the finishing mower with blades leaves a clean cut adjustable from 5 to 60 mm (0.2 to 2.4 in); the drum mower, 100 to 185 cm (39 to 73 in), cuts forage for baling, with 80 cm (31 in) mini round balers to match. Anyone without a tractor will find the self-propelled petrol flail mowers, wheeled or tracked, at 70 and 88 cm (28 and 35 in).
Hedge cutter arms, flail heads for mini diggers and hedge cutter bars
The hedge cutter arm mounts on the tractor's linkage, has an independent PTO-driven hydraulic system and carries a 60 to 110 cm (24 to 43 in) flail head or a 130 to 180 cm (51 to 71 in) finger bar up to 3.70 m (12 ft 2 in) high. The hydraulic flail heads for mini diggers and mini excavators, 60 to 120 cm (24 to 47 in), connect to the auxiliary circuit of machines from 0.8 to 7 tonnes and shred brambles, reeds and branches where the tractor cannot go. The finger bar hedge cutters and disc saw bars, 100 to 180 cm (39 to 71 in), trim hedges and branches up to 9 cm (3.5 in) in diameter on an arm or a mini digger.
Frequently asked questions
What is the difference between a flail mower, a pruning shredder and a stalk chopper?
They are different names for the same machine: a horizontal rotor with hammers or Y-blades driven by the tractor's PTO. A flail mower is for grass and light residue, a pruning shredder or stalk chopper is the sturdier model for prunings and maize stalks, and an all-purpose flail mower does everything. In the catalogue they are split by series: light, medium and heavy-duty.
How many horsepower does a tractor flail mower need?
From 12 hp for the 80 to 100 cm (31 to 39 in) light series up to 130 hp for the 220 to 260 cm (87 to 102 in) heavy-duty series. Each product page gives the minimum and maximum tractor power; the implement's weight also matters, against the linkage capacity and the tractor's stability.
Which working width should I choose?
As a rule 15 to 20 cm (6 to 8 in) more than the tractor's outer track, so the mower covers the wheel marks. Between rows the spacing of the plants counts: better a slightly narrower machine with side shift than one that is too wide.
Hammers or Y-blades?
Hammers for prunings, branches and mixed vegetation; Y-blades for grass and light work, with lower power draw. Hammers are standard on the tractor flail mowers; Y-blades on the heads for mini diggers up to 2 tonnes and, on request, on some heavy-duty mowers.
Will it fit a Kubota, Iseki, Yanmar or other compact tractor?
Yes: the tractor flail mowers have a three-point linkage, a 540 rpm PTO drive and the PTO shaft included, and the light series is sized precisely for compact tractors. Each product page gives the minimum and maximum power, weight and width.
Is the PTO shaft included?
Yes: tractor flail mowers, finishing mowers and drum mowers come with a CE-approved PTO shaft. The hedge cutter arms have their own PTO-driven hydraulic pump; the flail heads for mini diggers connect to the excavator's auxiliary hydraulic circuit.
What is a reversible flail mower?
A flail mower with a three-point linkage on either side, double or movable from one side to the other, and a gearbox that works in both directions: it mounts behind the tractor or in front, on the front linkage with a front PTO, to mow before the wheels pass.
Verge flail mower or hedge cutter arm?
The verge flail mower is a flail mower with side shift and a short arm that tilts the head: it works beside the tractor on ditches, banks and embankments. The hedge cutter arm reaches up to 3.70 m (12 ft 2 in) and carries flail heads or finger bars: it is for tall hedges, roadsides and steep banks.
What size of mini digger does a flail head need?
From 0.8 to 7 tonnes depending on the model: the head must match the excavator's weight and the flow of the auxiliary hydraulic circuit, with a double-acting pedal control and a case drain line on the models that need one.
Delivery and warranty?
All machines come with a 2-year warranty and free delivery within the EU by courier; orders are dispatched in 10 to 15 days, with a phone call before delivery.
Deutsch