DELEKS S.r.l.
Via Industriale, 23
25028 Verolanuova (BS) Italy
Tel. 030 6585725
Mail info@deleks.com
Lun - Ven: 9.00-13.00 / 14.00-18.00
Self-propelled petrol flail mower 70 cm (27.6 in) SMART-800, walk-behind flail mower for long grass and brambles
DETAILS
Self-propelled petrol flail mower on wheels with a 70 cm (27.6 in) cut and a 9 hp, 270 cc Loncin petrol engine: the DELEKS® SMART-800 is a professional walk-behind flail mower that clears long grass, brambles, reeds, vine prunings and branches up to 3 cm (1.2 in) thick on rough ground, in olive groves and vineyards, along ditch edges and in undergrowth, where a lawnmower gives up and a tractor can't get in or isn't worth bringing. Mechanical gearbox with 3 forward gears and reverse, electronically balanced rotor with 38 swinging Y-blades, cutting height from 20 to 80 mm (0.8 to 3.1 in) set with a crank handle, handlebars adjustable for height and offset, and two swivelling front wheels with locks. It is the lightest, handiest flail mower in the SMART range: 156 kg (344 lb) and 84 cm (33 in) wide overall. TÜV-certified, it arrives assembled and tested in a wooden crate, with a 2-year warranty and free delivery within the EU.
9 hp Loncin engine and 3-speed gearbox with reverse
The four-stroke Loncin petrol engine, 270 cc and 9 hp, has the power to keep the rotor spinning even in long, wet grass and starts on a recoil (pull) cord: it is the only model in the range without electric start, which comes as standard on the tracked SMART-800-TR and on the 88 cm SMART-1000 models. The mechanical gearbox has 3 forward gears and one reverse: pick the gear to suit the ground and how thick the growth is, slower in dense grass and brambles, quicker where there is less to cut; reverse gets you out of corners and makes turning at the end of a pass easy. Drive is by 3 V-belts (SB38.5, SB1610 and 13x1145), available as a spare set.
Rotor with 38 Y-blades for long grass, brambles and vine prunings
The electronically balanced rotor carries 38 swinging Y-blades that mulch long grass, brambles, weeds, vine prunings and light brash up to 3 cm (1.2 in) thick and leave it finely and evenly chopped on the ground: a flail mulcher with no collection. The blades are free-swinging: if they hit a stone or another obstacle they fold back, protecting the rotor and the drive. Cutting height is set from 20 to 80 mm (0.8 to 3.1 in) with a crank handle, low on grass and high on stony ground. This is not a garden lawnmower: the result is cleared ground, not a manicured lawn.
A pedestrian flail mower that drives itself: wheels, handlebars and handling
You walk behind the SMART-800 and steer it from the handlebars like any pedestrian flail mower, but you never push it: it is self-propelled and driven by the engine. It is the lightest in the range: 156 kg (344 lb), 84 cm (33 in) wide overall and 183 cm (72 in) long. The two swivelling front wheels make turning at the end of a pass easy and, once locked, hold a straight line on long runs; the handlebars adjust for height and sideways, so you can walk clear of the cut alongside fences, rows and edges. A sturdy frame and low centre of gravity keep the machine steady on uneven ground. For steep slopes, terraces and wet ground there is the tracked SMART-800-TR, with the same 70 cm cut.
Dimensions, weight and delivery
Working width 700 mm (27.6 in), overall width 836 mm (32.9 in), length 1,834 mm (72.2 in), weight 156 kg (344 lb). It ships by express carrier in a closed, sealed wooden crate measuring 190 × 90 × 90 cm (74.8 × 35.4 × 35.4 in) (190 kg / 419 lb gross, 1.54 m³), with free delivery within the EU; there is a photo of the crate in the gallery. Before dispatch the DELEKS® workshop preps and tests every machine: fasteners, fluid levels and a running test, so it arrives assembled and ready to work. It is TÜV-certified and carries a 2-year warranty.
Where it works
- Rough ground, scrub and plots that only get cut once or twice a year
- Olive groves, vineyards and orchards: grass between the rows, vine prunings and brash up to 3 cm (1.2 in)
- Verges, banks and ditch edges
- Undergrowth, brambles and reeds
- Farmland with long grass, even when wet
Options and spares
The mower arrives complete and ready to use. Available as spares are the set of 38 blades (SETCOLTELLISMART800) and the set of 3 drive belts (CINGHIE3SMART800), both of which can be added to your order from this page; other spares are identified on the exploded diagrams with our technical team.
FAQ
What does the SMART-800 cut?
Long and dry grass, brambles, reeds, weeds and branches up to 3 cm (1.2 in) thick, 70 cm (27.6 in) at a pass; the mulched material is left on the ground.
Will it mulch vine prunings?
Yes: vine prunings and light brash up to 3 cm (1.2 in) thick. For heavier prunings and bigger acreages, look at a tractor-mounted flail mower.
Is it a walk-behind (pedestrian) flail mower?
Yes: you walk behind it and steer from the handlebars, with no tractor needed, but you don't push it. It is self-propelled, with 3 forward gears and reverse.
What engine does it have and how does it start?
A four-stroke Loncin petrol engine, 270 cc and 9 hp, with recoil (pull) start. If you want electric key start, go for the tracked SMART-800-TR or the 88 cm SMART-1000 models.
Does it work on slopes?
It is built for flat and uneven ground. For steep slopes, terraces and wet ground there is the tracked SMART-800-TR, which works on gradients of up to 30° head-on and 20° across.
What happens if the blades hit a stone?
The blades swing freely and fold back on impact, protecting the rotor and the drive. They are wearing parts: the full set of 38 blades is available as a spare.
How do you adjust the cutting height?
With a crank handle, from 20 to 80 mm (0.8 to 3.1 in): low on grass, high on stony ground and scrub.
How does it differ from the SMART-1000?
The SMART-1000 cuts 88 cm (34.6 in) instead of 70, has a 13.5 hp Briggs & Stratton engine with electric start, 66 blades and twin-belt drive: it covers more ground per hour. The SMART-800 is 40 kg (88 lb) lighter and gets into tight spots.
How is it delivered?
In a closed wooden crate by express carrier, fully assembled and tested by the DELEKS® workshop; the CE declaration of conformity, invoice and operator's manual come with the machine.
DELEKS® spares and support
Genuine spares ship from DELEKS® warehouses in Europe: blade sets, drive belts, rotor bearings and the other parts of the machine are available for routine servicing and repairs alike. DELEKS® after-sales looks after every customer directly: technical advice, warranty handling, genuine spares identified on the exploded diagrams and help arranging any service work. The machine comes with its CE declaration of conformity, invoice and operator's manual. 2-year warranty and free delivery within the EU.
CHARACTERISTICS
| Characteristic | Units metric |
|---|---|
| Working width | 700.0 mm |
| Overall width | 836.0 mm |
| Min / Max cutting height | 20.0 - 80.0 mm |
| Weight | 156.0 kg |
| Maximum cutting diameter | 30.0 mm |
| Overall length | 1834.0 mm |
| Transmission: Drive method | V-Belts |
| Transmission: V-Belts quantity | 3 |
| Transmission: V-Belts size | SB38.5 + SB1610 + 13X1145 |
| Rotor: balancing | Electronic |
| Engine | Loncin 9.0Hp, 270cc |
| Number of Blades | 38 |
| Gross shipping weight | 190 kg |
| Package volume | 1.54 m3 |
| Packing sizes | 1900*900*900 mm |
DETAILS
CLOSESelf-propelled petrol flail mower on wheels with a 70 cm (27.6 in) cut and a 9 hp, 270 cc Loncin petrol engine: the DELEKS® SMART-800 is a professional walk-behind flail mower that clears long grass, brambles, reeds, vine prunings and branches up to 3 cm (1.2 in) thick on rough ground, in olive groves and vineyards, along ditch edges and in undergrowth, where a lawnmower gives up and a tractor can't get in or isn't worth bringing. Mechanical gearbox with 3 forward gears and reverse, electronically balanced rotor with 38 swinging Y-blades, cutting height from 20 to 80 mm (0.8 to 3.1 in) set with a crank handle, handlebars adjustable for height and offset, and two swivelling front wheels with locks. It is the lightest, handiest flail mower in the SMART range: 156 kg (344 lb) and 84 cm (33 in) wide overall. TÜV-certified, it arrives assembled and tested in a wooden crate, with a 2-year warranty and free delivery within the EU.
9 hp Loncin engine and 3-speed gearbox with reverse
The four-stroke Loncin petrol engine, 270 cc and 9 hp, has the power to keep the rotor spinning even in long, wet grass and starts on a recoil (pull) cord: it is the only model in the range without electric start, which comes as standard on the tracked SMART-800-TR and on the 88 cm SMART-1000 models. The mechanical gearbox has 3 forward gears and one reverse: pick the gear to suit the ground and how thick the growth is, slower in dense grass and brambles, quicker where there is less to cut; reverse gets you out of corners and makes turning at the end of a pass easy. Drive is by 3 V-belts (SB38.5, SB1610 and 13x1145), available as a spare set.
Rotor with 38 Y-blades for long grass, brambles and vine prunings
The electronically balanced rotor carries 38 swinging Y-blades that mulch long grass, brambles, weeds, vine prunings and light brash up to 3 cm (1.2 in) thick and leave it finely and evenly chopped on the ground: a flail mulcher with no collection. The blades are free-swinging: if they hit a stone or another obstacle they fold back, protecting the rotor and the drive. Cutting height is set from 20 to 80 mm (0.8 to 3.1 in) with a crank handle, low on grass and high on stony ground. This is not a garden lawnmower: the result is cleared ground, not a manicured lawn.
A pedestrian flail mower that drives itself: wheels, handlebars and handling
You walk behind the SMART-800 and steer it from the handlebars like any pedestrian flail mower, but you never push it: it is self-propelled and driven by the engine. It is the lightest in the range: 156 kg (344 lb), 84 cm (33 in) wide overall and 183 cm (72 in) long. The two swivelling front wheels make turning at the end of a pass easy and, once locked, hold a straight line on long runs; the handlebars adjust for height and sideways, so you can walk clear of the cut alongside fences, rows and edges. A sturdy frame and low centre of gravity keep the machine steady on uneven ground. For steep slopes, terraces and wet ground there is the tracked SMART-800-TR, with the same 70 cm cut.
Dimensions, weight and delivery
Working width 700 mm (27.6 in), overall width 836 mm (32.9 in), length 1,834 mm (72.2 in), weight 156 kg (344 lb). It ships by express carrier in a closed, sealed wooden crate measuring 190 × 90 × 90 cm (74.8 × 35.4 × 35.4 in) (190 kg / 419 lb gross, 1.54 m³), with free delivery within the EU; there is a photo of the crate in the gallery. Before dispatch the DELEKS® workshop preps and tests every machine: fasteners, fluid levels and a running test, so it arrives assembled and ready to work. It is TÜV-certified and carries a 2-year warranty.
Where it works
- Rough ground, scrub and plots that only get cut once or twice a year
- Olive groves, vineyards and orchards: grass between the rows, vine prunings and brash up to 3 cm (1.2 in)
- Verges, banks and ditch edges
- Undergrowth, brambles and reeds
- Farmland with long grass, even when wet
Options and spares
The mower arrives complete and ready to use. Available as spares are the set of 38 blades (SETCOLTELLISMART800) and the set of 3 drive belts (CINGHIE3SMART800), both of which can be added to your order from this page; other spares are identified on the exploded diagrams with our technical team.
FAQ
What does the SMART-800 cut?
Long and dry grass, brambles, reeds, weeds and branches up to 3 cm (1.2 in) thick, 70 cm (27.6 in) at a pass; the mulched material is left on the ground.
Will it mulch vine prunings?
Yes: vine prunings and light brash up to 3 cm (1.2 in) thick. For heavier prunings and bigger acreages, look at a tractor-mounted flail mower.
Is it a walk-behind (pedestrian) flail mower?
Yes: you walk behind it and steer from the handlebars, with no tractor needed, but you don't push it. It is self-propelled, with 3 forward gears and reverse.
What engine does it have and how does it start?
A four-stroke Loncin petrol engine, 270 cc and 9 hp, with recoil (pull) start. If you want electric key start, go for the tracked SMART-800-TR or the 88 cm SMART-1000 models.
Does it work on slopes?
It is built for flat and uneven ground. For steep slopes, terraces and wet ground there is the tracked SMART-800-TR, which works on gradients of up to 30° head-on and 20° across.
What happens if the blades hit a stone?
The blades swing freely and fold back on impact, protecting the rotor and the drive. They are wearing parts: the full set of 38 blades is available as a spare.
How do you adjust the cutting height?
With a crank handle, from 20 to 80 mm (0.8 to 3.1 in): low on grass, high on stony ground and scrub.
How does it differ from the SMART-1000?
The SMART-1000 cuts 88 cm (34.6 in) instead of 70, has a 13.5 hp Briggs & Stratton engine with electric start, 66 blades and twin-belt drive: it covers more ground per hour. The SMART-800 is 40 kg (88 lb) lighter and gets into tight spots.
How is it delivered?
In a closed wooden crate by express carrier, fully assembled and tested by the DELEKS® workshop; the CE declaration of conformity, invoice and operator's manual come with the machine.
DELEKS® spares and support
Genuine spares ship from DELEKS® warehouses in Europe: blade sets, drive belts, rotor bearings and the other parts of the machine are available for routine servicing and repairs alike. DELEKS® after-sales looks after every customer directly: technical advice, warranty handling, genuine spares identified on the exploded diagrams and help arranging any service work. The machine comes with its CE declaration of conformity, invoice and operator's manual. 2-year warranty and free delivery within the EU.
CHARACTERISTICS
CLOSE| Characteristic | Units metric |
|---|---|
| Working width | 700.0 mm |
| Overall width | 836.0 mm |
| Min / Max cutting height | 20.0 - 80.0 mm |
| Weight | 156.0 kg |
| Maximum cutting diameter | 30.0 mm |
| Overall length | 1834.0 mm |
| Transmission: Drive method | V-Belts |
| Transmission: V-Belts quantity | 3 |
| Transmission: V-Belts size | SB38.5 + SB1610 + 13X1145 |
| Rotor: balancing | Electronic |
| Engine | Loncin 9.0Hp, 270cc |
| Number of Blades | 38 |
| Gross shipping weight | 190 kg |
| Package volume | 1.54 m3 |
| Packing sizes | 1900*900*900 mm |
Deutsch