DELEKS S.r.l.
Via Industriale, 23
25028 Verolanuova (BS) Italy
Tel. 030 6585725
Mail info@deleks.com
Lun - Ven: 9.00-13.00 / 14.00-18.00
Hydraulic side-shift flail mower 165 cm (65 in) LINCE-165-SPH, hammer flail mower for 25-45 hp compact tractors
DETAILS
Hammer flail mower for compact tractors with a 165 cm (65 in) cut and 25 cm (10 in) of hydraulic side shift as standard, from the DELEKS® light series: the LINCE-165-SPH is the side-shift mower for tractors from 25 to 45 hp with a category 1 three-point linkage, such as Kubota, Solis, New Holland Boomer, Goldoni, Same and Landini, moved from the seat as you work along rows, fences, ditches and field edges. The side shift comes complete with hydraulic ram, a pair of 150 cm (59 in) hoses and ½ in quick-release couplings. The electronically balanced rotor carries 30 hammer flails of 330 g (11.6 oz) in 6 rows and shreds grass, leaves, brambles and prunings up to 3 cm (1.2 in) thick; the rear roller and side skids set the cutting height from 10 to 45 mm (0.4 to 1.8 in). DELEKS® 540 rpm gearbox with freewheel and a 3-year warranty, 4-belt drive with external tensioner, 245 kg (540 lb). Made in Italy, built by DELEKS, it comes complete with a CE-approved PTO shaft, a 2-year warranty and free delivery within the EU.
Hydraulic side shift of 25 cm (10 in), as standard
The DELEKS® hydraulic side shift is standard, with 25 cm (10 in) of travel: you work it from the seat with the tractor's spool valve, even on the move. It brings the mower in to the row and away from posts and stumps, to mow under the canopy, along fences and ditches and on field edges, keeping the tractor's wheels away from the edge. It arrives fitted and complete: hydraulic ram, a pair of 150 cm (59 in) hoses and standard ½ in agricultural quick-release couplings; the tractor needs a pair of rear hydraulic outlets (one double-acting spool valve).
Which tractors it fits
The LINCE-165-SPH cuts 165 cm (65 in) with an overall width of 175.5 cm (69.1 in) and is built for wheeled or tracked tractors from 25 to 45 hp with a 540 rpm PTO and a category 1 three-point linkage (19-22 mm pins, lower link spacing from 520 to 620 mm): Kubota B and L series, Solis, New Holland Boomer 30-40 and TD3.50, John Deere 3 Series, Goldoni Star, Lamborghini Ego, Landini Mistral, Same Solaris and Same Delfino. At 245 kg (540 lb) it is well within the lift capacity of tractors in this class, on the flat and on slopes. As a rule of thumb the mower should be 15 to 20 cm (6 to 8 in) wider than the tractor's outer track, so it covers the wheel marks. If your tractor's PTO turns anticlockwise, order the LINCE-165-SPH with the reverse-rotation gearbox (option SOSTMOLTSXLINCE).
Rotor with 30 hammer flails in 6 rows
The rotor is built from ARVEDI S355 steel tube, 8 mm (5/16 in) thick and 102 mm (4 in) in diameter, electronically balanced, and spins at 3,150 rpm on SKF bearings. The 30 hammer flails weigh 330 g (11.6 oz) each and sit in 6 rows rather than 4, on brackets in HARDOX wear-resistant steel: they pulverise grass, leaves, brambles and small vine and olive prunings up to 3 cm (1.2 in) thick. A ridge inside the hood directs the airflow back onto the rotor for a mulching effect: the material stays under the flails for longer and comes out finer. On request the LINCE-165-SPH can be fitted with blades instead, using the COLTELLI30APE kit.
Internal roller, skids and cutting height
Cutting height is set from 10 to 45 mm (0.4 to 1.8 in) with the 102 mm (4 in) rear roller and the 6 mm side skids: low on grass, higher on stony or uneven ground. The roller is mounted inside the body, close to the rotor: the cut grass passes over the roller without being flattened and is cleared more quickly, so the job moves along faster.
Gearbox with freewheel, belts and PTO shaft
The DELEKS® gearbox for a 540 rpm PTO has a built-in freewheel and a 3-year warranty: when you disengage the PTO the rotor carries on turning under its own momentum and runs down by itself, without driving back through the tractor's transmission. Drive reaches the rotor through 4 AX39 V-belts; the tensioner is adjustable and belt tension is set from the outside. The CE-approved category 4 PTO shaft, 800 mm (31.5 in) long, is included: if your tractor's linkage sits very close, shorten it as shown in the manual.
SSAB steel frame, Made in Italy
The frame is made entirely from Swedish SSAB steel, 4 mm thick with 5 mm side plates; the flail brackets are HARDOX and the rotor bearings are SKF. The LINCE-165-SPH is Made in Italy, built by DELEKS. For this product the sheet steel is bought in Italy and worked at a production plant in the European Union.
Dimensions, weight and delivery
Working width 1,650 mm (65.0 in), overall width 1,755 mm (69.1 in), length 880 mm (34.6 in), height 750 mm (29.5 in), weight 245 kg (540 lb). It ships in packaging measuring 175.5 × 85 × 70 cm (69 × 33 × 28 in), 286 kg (631 lb) gross, 1.04 m³, with free delivery within the EU. It complies with the EC Machinery Directive and carries a 2-year warranty.
Where it works
- Vineyards, orchards and olive groves: grass between the rows and under the canopy, prunings up to 3 cm (1.2 in)
- Rows, fence lines and ditches: the mower moves in and out from the seat
- Field edges and headlands: working offset, with the tractor kept away from the edge
- Lawns, parks and amenity grass: topping with a mulching effect, no collection
- On the flat and on slopes, with wheeled or tracked tractors from 25 to 45 hp
Options and spares
From this page you can add to your order the kit of 10 hammer flails (MAZZE10L2022), the 10 nuts and bolts for the flails (DB10L2022), the blade kit, 10 sets of 3 (COLTELLI30APE), spare pins for the three-point linkage (3PERNI1A), the universal PTO adapter (RID1) and the reverse-rotation gearbox in place of the standard one (SOSTMOLTSXLINCE). Other spares are identified on the exploded diagrams with our technical team.
FAQ
How does the hydraulic side shift work?
A hydraulic ram moves the mower up to 25 cm (10 in) sideways; you work it from the seat with a double-acting spool valve on the tractor, even on the move. Ram, 150 cm (59 in) hoses and ½ in quick-release couplings are standard.
What does the tractor need?
25 to 45 hp, a 540 rpm PTO, a category 1 three-point linkage and a pair of rear hydraulic outlets for the side shift.
How does it differ from the LINCE-SP?
The LINCE-165-SP has the same 25 cm (10 in) side shift, but manual: you set it with the machine stopped before you start. With the LINCE-165-SPH you shift from the seat as you work.
Will it shred prunings?
Yes: small vine and olive prunings and branches up to 3 cm (1.2 in) thick, as well as grass, leaves and brambles. For thicker prunings or continuous work the medium series is the better choice.
Hammer flails or blades?
It comes with 30 hammer flails of 330 g (11.6 oz), suited to grass, brambles and prunings. On request it can be fitted with blades using the COLTELLI30APE kit.
Is it suitable for tractors with an anticlockwise PTO?
Yes, with the reverse-rotation gearbox (option SOSTMOLTSXLINCE): it is for tractors whose PTO turns anticlockwise, such as some Pasquali, BCS and Valpadana models. The direction of rotation is given in the tractor handbook.
How do you set the cutting height?
From 10 to 45 mm (0.4 to 1.8 in), with the rear roller and the side skids: low on grass, higher on stony ground.
Is the PTO shaft included?
Yes: a CE-approved category 4 PTO shaft, 800 mm (31.5 in) long, to be shortened as shown in the manual if the tractor's linkage sits very close.
DELEKS® spares and support
Genuine spares ship from DELEKS® warehouses in Europe: flails, brackets, belts, bearings, rear roller, skids and drive components are available for routine servicing and repairs alike. DELEKS® after-sales looks after every customer directly: technical advice, warranty handling, genuine spares identified on the exploded diagrams and help choosing the right mower and accessories for your tractor. The machine comes with its CE declaration of conformity, invoice and operator's manual. 2-year warranty and free delivery within the EU.
CHARACTERISTICS
| Characteristic | Units metric |
|---|---|
| Working width | 1650.0 mm |
| Overall width | 1755.0 mm |
| Min / Max cutting height | 10.0 - 45.0 mm |
| Weight | 245.0 kg |
| Overall height | 750.0 mm |
| Tractor Power Range | 25 - 45 Hp |
| 3 point linkage | Cat. 1 (ø 19.0-22.0mm) |
| Position of the gearbox | 702.0 mm from left side / 992.0 mm from right side |
| Hood height | 370.0 mm |
| Spacing between the 2 lower points | 520.0 - 620.0 mm |
| Number of Hammers | 30 |
| Maximum cutting diameter | 20.0 - 30.0 mm |
| Overall length | 880.0 mm |
| Distance between pto attachment and ground | 472.0 mm |
| Main hood thickness | 4.0 mm |
| Sides thickness | 5.0 mm |
| Side plates thickness | 6.0 mm |
| Transmission: Drive method | V-Belts |
| Transmission: Gearbox | DELEKS (3 year warranty) |
| Transmission: PTO | 540 r/min |
| Transmission: Rotation of gearbox | Right side |
| Transmission: Free wheel | √ |
| Transmission: RPM Rotor speed | 3150.0 rpm |
| Transmission: Oil in the gearbox | Yes / SAE 120 - ISO 72925 |
| Transmission: Top pulley ø | 206.0 mm |
| Transmission: Lower pulley ø | 106.0 mm |
| Transmission: V-Belts quantity | 4 |
| Transmission: V-Belts size | AX39 |
| Rotor: diameter | 102.0 mm |
| Rotor: balancing | Electronic |
| Rotor: sheet thickness | 8.0 mm |
| Hammers: Weight | 330.0 g |
| Hammer: øhole | 11.0 mm |
| Hammer: base width | 80.0 mm |
| Hammer: top width | 14.0 mm |
| Hammer: Diagonal | 75.0 mm |
| Rear roller: diameter | 102.0 mm |
| Rear roller: sheet thickness | 6.0 mm |
| Rear roller: bearings type and size | FL205 |
| Pto shaft | CE 4x800 mm |
| Hood length | 665.0 mm |
| Effective Displacement | 250.0 mm (Hydraulic) |
| Gross shipping weight | 286 kg |
| Package volume | 1.04 m3 |
| Packing sizes | 1755.0*850.0*700.0 mm |
DETAILS
CLOSEHammer flail mower for compact tractors with a 165 cm (65 in) cut and 25 cm (10 in) of hydraulic side shift as standard, from the DELEKS® light series: the LINCE-165-SPH is the side-shift mower for tractors from 25 to 45 hp with a category 1 three-point linkage, such as Kubota, Solis, New Holland Boomer, Goldoni, Same and Landini, moved from the seat as you work along rows, fences, ditches and field edges. The side shift comes complete with hydraulic ram, a pair of 150 cm (59 in) hoses and ½ in quick-release couplings. The electronically balanced rotor carries 30 hammer flails of 330 g (11.6 oz) in 6 rows and shreds grass, leaves, brambles and prunings up to 3 cm (1.2 in) thick; the rear roller and side skids set the cutting height from 10 to 45 mm (0.4 to 1.8 in). DELEKS® 540 rpm gearbox with freewheel and a 3-year warranty, 4-belt drive with external tensioner, 245 kg (540 lb). Made in Italy, built by DELEKS, it comes complete with a CE-approved PTO shaft, a 2-year warranty and free delivery within the EU.
Hydraulic side shift of 25 cm (10 in), as standard
The DELEKS® hydraulic side shift is standard, with 25 cm (10 in) of travel: you work it from the seat with the tractor's spool valve, even on the move. It brings the mower in to the row and away from posts and stumps, to mow under the canopy, along fences and ditches and on field edges, keeping the tractor's wheels away from the edge. It arrives fitted and complete: hydraulic ram, a pair of 150 cm (59 in) hoses and standard ½ in agricultural quick-release couplings; the tractor needs a pair of rear hydraulic outlets (one double-acting spool valve).
Which tractors it fits
The LINCE-165-SPH cuts 165 cm (65 in) with an overall width of 175.5 cm (69.1 in) and is built for wheeled or tracked tractors from 25 to 45 hp with a 540 rpm PTO and a category 1 three-point linkage (19-22 mm pins, lower link spacing from 520 to 620 mm): Kubota B and L series, Solis, New Holland Boomer 30-40 and TD3.50, John Deere 3 Series, Goldoni Star, Lamborghini Ego, Landini Mistral, Same Solaris and Same Delfino. At 245 kg (540 lb) it is well within the lift capacity of tractors in this class, on the flat and on slopes. As a rule of thumb the mower should be 15 to 20 cm (6 to 8 in) wider than the tractor's outer track, so it covers the wheel marks. If your tractor's PTO turns anticlockwise, order the LINCE-165-SPH with the reverse-rotation gearbox (option SOSTMOLTSXLINCE).
Rotor with 30 hammer flails in 6 rows
The rotor is built from ARVEDI S355 steel tube, 8 mm (5/16 in) thick and 102 mm (4 in) in diameter, electronically balanced, and spins at 3,150 rpm on SKF bearings. The 30 hammer flails weigh 330 g (11.6 oz) each and sit in 6 rows rather than 4, on brackets in HARDOX wear-resistant steel: they pulverise grass, leaves, brambles and small vine and olive prunings up to 3 cm (1.2 in) thick. A ridge inside the hood directs the airflow back onto the rotor for a mulching effect: the material stays under the flails for longer and comes out finer. On request the LINCE-165-SPH can be fitted with blades instead, using the COLTELLI30APE kit.
Internal roller, skids and cutting height
Cutting height is set from 10 to 45 mm (0.4 to 1.8 in) with the 102 mm (4 in) rear roller and the 6 mm side skids: low on grass, higher on stony or uneven ground. The roller is mounted inside the body, close to the rotor: the cut grass passes over the roller without being flattened and is cleared more quickly, so the job moves along faster.
Gearbox with freewheel, belts and PTO shaft
The DELEKS® gearbox for a 540 rpm PTO has a built-in freewheel and a 3-year warranty: when you disengage the PTO the rotor carries on turning under its own momentum and runs down by itself, without driving back through the tractor's transmission. Drive reaches the rotor through 4 AX39 V-belts; the tensioner is adjustable and belt tension is set from the outside. The CE-approved category 4 PTO shaft, 800 mm (31.5 in) long, is included: if your tractor's linkage sits very close, shorten it as shown in the manual.
SSAB steel frame, Made in Italy
The frame is made entirely from Swedish SSAB steel, 4 mm thick with 5 mm side plates; the flail brackets are HARDOX and the rotor bearings are SKF. The LINCE-165-SPH is Made in Italy, built by DELEKS. For this product the sheet steel is bought in Italy and worked at a production plant in the European Union.
Dimensions, weight and delivery
Working width 1,650 mm (65.0 in), overall width 1,755 mm (69.1 in), length 880 mm (34.6 in), height 750 mm (29.5 in), weight 245 kg (540 lb). It ships in packaging measuring 175.5 × 85 × 70 cm (69 × 33 × 28 in), 286 kg (631 lb) gross, 1.04 m³, with free delivery within the EU. It complies with the EC Machinery Directive and carries a 2-year warranty.
Where it works
- Vineyards, orchards and olive groves: grass between the rows and under the canopy, prunings up to 3 cm (1.2 in)
- Rows, fence lines and ditches: the mower moves in and out from the seat
- Field edges and headlands: working offset, with the tractor kept away from the edge
- Lawns, parks and amenity grass: topping with a mulching effect, no collection
- On the flat and on slopes, with wheeled or tracked tractors from 25 to 45 hp
Options and spares
From this page you can add to your order the kit of 10 hammer flails (MAZZE10L2022), the 10 nuts and bolts for the flails (DB10L2022), the blade kit, 10 sets of 3 (COLTELLI30APE), spare pins for the three-point linkage (3PERNI1A), the universal PTO adapter (RID1) and the reverse-rotation gearbox in place of the standard one (SOSTMOLTSXLINCE). Other spares are identified on the exploded diagrams with our technical team.
FAQ
How does the hydraulic side shift work?
A hydraulic ram moves the mower up to 25 cm (10 in) sideways; you work it from the seat with a double-acting spool valve on the tractor, even on the move. Ram, 150 cm (59 in) hoses and ½ in quick-release couplings are standard.
What does the tractor need?
25 to 45 hp, a 540 rpm PTO, a category 1 three-point linkage and a pair of rear hydraulic outlets for the side shift.
How does it differ from the LINCE-SP?
The LINCE-165-SP has the same 25 cm (10 in) side shift, but manual: you set it with the machine stopped before you start. With the LINCE-165-SPH you shift from the seat as you work.
Will it shred prunings?
Yes: small vine and olive prunings and branches up to 3 cm (1.2 in) thick, as well as grass, leaves and brambles. For thicker prunings or continuous work the medium series is the better choice.
Hammer flails or blades?
It comes with 30 hammer flails of 330 g (11.6 oz), suited to grass, brambles and prunings. On request it can be fitted with blades using the COLTELLI30APE kit.
Is it suitable for tractors with an anticlockwise PTO?
Yes, with the reverse-rotation gearbox (option SOSTMOLTSXLINCE): it is for tractors whose PTO turns anticlockwise, such as some Pasquali, BCS and Valpadana models. The direction of rotation is given in the tractor handbook.
How do you set the cutting height?
From 10 to 45 mm (0.4 to 1.8 in), with the rear roller and the side skids: low on grass, higher on stony ground.
Is the PTO shaft included?
Yes: a CE-approved category 4 PTO shaft, 800 mm (31.5 in) long, to be shortened as shown in the manual if the tractor's linkage sits very close.
DELEKS® spares and support
Genuine spares ship from DELEKS® warehouses in Europe: flails, brackets, belts, bearings, rear roller, skids and drive components are available for routine servicing and repairs alike. DELEKS® after-sales looks after every customer directly: technical advice, warranty handling, genuine spares identified on the exploded diagrams and help choosing the right mower and accessories for your tractor. The machine comes with its CE declaration of conformity, invoice and operator's manual. 2-year warranty and free delivery within the EU.
CHARACTERISTICS
CLOSE| Characteristic | Units metric |
|---|---|
| Working width | 1650.0 mm |
| Overall width | 1755.0 mm |
| Min / Max cutting height | 10.0 - 45.0 mm |
| Weight | 245.0 kg |
| Overall height | 750.0 mm |
| Tractor Power Range | 25 - 45 Hp |
| 3 point linkage | Cat. 1 (ø 19.0-22.0mm) |
| Position of the gearbox | 702.0 mm from left side / 992.0 mm from right side |
| Hood height | 370.0 mm |
| Spacing between the 2 lower points | 520.0 - 620.0 mm |
| Number of Hammers | 30 |
| Maximum cutting diameter | 20.0 - 30.0 mm |
| Overall length | 880.0 mm |
| Distance between pto attachment and ground | 472.0 mm |
| Main hood thickness | 4.0 mm |
| Sides thickness | 5.0 mm |
| Side plates thickness | 6.0 mm |
| Transmission: Drive method | V-Belts |
| Transmission: Gearbox | DELEKS (3 year warranty) |
| Transmission: PTO | 540 r/min |
| Transmission: Rotation of gearbox | Right side |
| Transmission: Free wheel | √ |
| Transmission: RPM Rotor speed | 3150.0 rpm |
| Transmission: Oil in the gearbox | Yes / SAE 120 - ISO 72925 |
| Transmission: Top pulley ø | 206.0 mm |
| Transmission: Lower pulley ø | 106.0 mm |
| Transmission: V-Belts quantity | 4 |
| Transmission: V-Belts size | AX39 |
| Rotor: diameter | 102.0 mm |
| Rotor: balancing | Electronic |
| Rotor: sheet thickness | 8.0 mm |
| Hammers: Weight | 330.0 g |
| Hammer: øhole | 11.0 mm |
| Hammer: base width | 80.0 mm |
| Hammer: top width | 14.0 mm |
| Hammer: Diagonal | 75.0 mm |
| Rear roller: diameter | 102.0 mm |
| Rear roller: sheet thickness | 6.0 mm |
| Rear roller: bearings type and size | FL205 |
| Pto shaft | CE 4x800 mm |
| Hood length | 665.0 mm |
| Effective Displacement | 250.0 mm (Hydraulic) |
| Gross shipping weight | 286 kg |
| Package volume | 1.04 m3 |
| Packing sizes | 1755.0*850.0*700.0 mm |
Deutsch