Filter by sub-categories
How to choose an auger for your mini digger
- Direct drive or gearbox. The orbital-motor drive turns fast, up to 300 rpm, with around 460 Nm of torque: fine for posts, fences and planting in normal ground with machines from 0.5 to 2 tonnes, it weighs 24-30 kg and fits in minutes. The gearbox drive turns slowly, 30-60 rpm, but with 1,600 to almost 5,000 Nm of torque: that is the one for compacted, clay or stony ground, for the 30 cm augers and for excavators from 2.5 to 6 tonnes. Torque matters more than speed: an auger that spins fast but stalls in hard ground does not make the hole.
- Machine weight and hydraulics. The small drives work with 15-20 l/min at 160 bar, the medium ones with 20-60 l/min at 180 bar, the gearbox drives with 40-95 l/min at up to 210 bar: the flow and pressure of the machine's auxiliary line are in its manual and should be compared with the figures on the product page. A drive that asks for more oil than the machine gives turns slowly and overheats; one undersized for the machine breaks.
- Auger diameter and depth. The 10 and 15 cm augers are for fence posts, saplings and stakes; the 20 cm one for vineyard, orchard and signpost posts; the 30 cm one for trees, large posts and footings. They swap in a minute on the same drive. Depth depends on the length of the auger and on the ground: you go down as far as the flight can bring the spoil up. For stumps there is the vertical stump grinder, which fits in place of the auger and grinds the stump below ground level.
- Fitting to the dipper. The drive fits in place of the bucket with the pins of its hitch size or with the saddle for the S30 quick hitch; for other machines, as an option, there is the saddle made to measure for your mini digger or the saddle for standard quick couplers, MS01, AR15 and the like; for skid steers, backhoes and tractors with loader there is the bracket. The three dimensions to compare are always the same: pin diameter, pin centres and inside width of the hitch, listed on every product page. The drive hangs from the dipper and lines itself up vertically: the hole comes out straight without forcing.
- Hard ground, stones and roots. In compacted ground start with a small auger and widen with the large one; in stony ground work with the gearbox drive at low speed, lifting the auger every 20-30 cm to clear the spoil. Roots are cut by the pilot tip; large stones are removed with the bucket. The right speed is the one that brings the soil up the flight without smearing it.
- Delivery, warranty and spares. Drives and augers travel on a pallet by courier; the hoses are included, the quick couplings are not, because every mini digger has its own line and they are chosen accordingly; pilot tips and stump grinder blades are in stock. Two-year warranty on defects in materials and workmanship; tips, blades and wear parts excluded.
Frequently asked questions
Which auger drive do I need for my mini digger?
Choose it on the weight of the machine and its auxiliary line: orbital-motor drives for machines from 0.5 to 2 tonnes, gearbox drives from 2.5 to 6 tonnes. With the make and model we point you to the right one.
What is the difference between the direct drive and the gearbox drive?
The direct drive turns fast with little torque, fine for posts and fences in normal ground; the gearbox drive turns slowly with up to ten times the torque, for hard ground, 30 cm augers and larger excavators.
Which auger diameter for fence posts?
10 to 15 cm (4" to 6") for posts and stakes, 20 cm (8") for vineyard posts and signs, 30 cm (12") for trees and footings. Augers swap on the same drive.
How deep does it drill?
It depends on the length of the auger and on the ground: the auger goes down as long as the flight brings the spoil up, deeper in soft ground than in hard.
Does the auger fit a mini digger of another make?
Yes: with the pins of the same hitch size, with a saddle made to measure for the machine or with the saddle for standard quick couplers such as MS01 and AR15; for skid steers and backhoes with the bracket. The dimensions to compare are on every product page.
How many hydraulic lines do I need?
One double-acting auxiliary line with two hoses. The hoses are included; the quick couplings are chosen to suit your machine's line.
Does it work in stony ground or through roots?
Yes, with the gearbox drive at low speed, lifting the auger often to clear the spoil. Roots are cut by the tip; large stones have to be taken out with the bucket.
What is the vertical stump grinder?
A 30 cm cutter that fits in place of the auger on the gearbox drives and grinds stumps below ground level without pulling them out.
How much does a mini digger auger cost?
Prices for drives and augers are on each product page, with the pallet delivery cost shown in the basket.
What warranty do the augers have?
Two years on defects in materials and workmanship; tips, blades and wear parts excluded.
Deutsch