Filter by sub-categories
How to choose a grab for your mini digger
- Mechanical, hydraulic or selector. The mechanical log and stone grab is the simplest and cheapest: it fits in place of the bucket, works off the dipper linkage and needs no hydraulics, so it goes on machines without an auxiliary line too. The hydraulic forestry grab has its own ram, connects with two hoses to the mini digger's auxiliary line and holds logs, stumps, bundles and stones with constant force; with the 360° rotator the load is turned without moving the machine. The selector grab, with wide toothed jaws, is made for stones, scrap and demolition material to be sorted, as well as timber.
- Rating and machine weight. Hydraulic grabs rated 400-600 kg go on 1.5 to 2.5-tonne mini diggers, 1,000 kg grabs on machines up to 3.5 tonnes, 2,000-2,500 kg grabs on 4 to 10-tonne excavators; the opening goes from about 90-100 cm (35-39") on the small ones to 110-120 cm (43-47") on the medium ones and more on the large ones. An oversized grab weighs down the dipper and makes the machine unstable, an undersized one wears out sooner: choose the rating on the weight of the machine, not on the load you would like to lift.
- Rotator, fork and quick hitch. The hydraulic grab connects to the dipper through the rotator or through a fork: the pin-type rotator is the simplest, the flanged one is sturdier, and the flanged version for quick hitch lets you switch from bucket to grab without knocking out the dipper pins. Rotators rated 1, 3 and 4.5 tonnes are matched to the grab rating; forks and saddles connect rotator and grab to the dipper of the individual machine. The rotator needs a second hydraulic function: if the machine has only one auxiliary line, a diverter valve can be added.
- The mini digger's hydraulics. Light grabs work at 80-120 bar with 18-22 l/min, the larger ones at up to 220 bar and 50 l/min: the figures for the machine's auxiliary line are in its manual and should be compared with those on the product page. Mechanical grabs have none of these constraints.
- Fit with the machine. For mechanical grabs the three hitch dimensions apply, listed on every product page: pin diameter, pin centres and inside width; with the same dimensions they fit Kubota, Bobcat, Takeuchi, JCB and other makes too. For hydraulic grabs what matters is the fork, chosen on the dipper dimensions, and the auxiliary line. With the make and model of the machine everything is confirmed before you order.
- Delivery, warranty and spares. Grabs travel on a pallet by courier; rotators, forks, saddles and hoses are in stock. Two-year warranty on defects in materials and workmanship; jaws and wear parts are excluded.
Frequently asked questions
What is the difference between a log grab, a selector grab and a mechanical grab?
The hydraulic log grab holds logs and bundles with its own ram; the selector grab has wide toothed jaws for stones, scrap and demolition; the mechanical grab opens and closes with the bucket movement, with no hydraulics, and is the cheapest choice for logs and stones.
What rating do I need for my mini digger?
400-600 kg for 1.5 to 2.5-tonne machines, 1,000 kg up to 3.5 tonnes, 2,000-2,500 kg for 4 to 10-tonne excavators. With the weight of the machine and the type of work we point you to the right grab.
Do I need a rotator?
It is not compulsory: the grab also works fixed on the fork. With the rotator you turn the load without moving the machine, handy for stacking logs and loading trailers; it needs a second hydraulic function.
How many hydraulic lines do I need?
One auxiliary line with two hoses for the hydraulic grab; a second function for the rotator. Mechanical grabs need none.
Does the grab fit a mini digger of another make?
Yes: hydraulic grabs with rotator fit with the fork that suits the dipper; mechanical grabs fit machines with the same hitch dimensions, listed on every product page.
Do you have grabs for quick hitches?
Yes, the versions with flanged rotator for quick hitch: you switch between bucket and grab without knocking out the pins.
What does Hardox mean?
It is a wear-resistant steel, harder than structural steel: Hardox jaws last longer with stones and abrasive timber and, for the same strength, weigh less.
How much does a grab weigh?
It depends on the rating and the rotator: the weight of each grab is on its product page and should be compared with the machine's lifting capacity at full reach.
How much does a mini digger grab cost?
Prices are on each product page, with the pallet delivery cost shown in the basket.
What warranty do the grabs have?
Two years on defects in materials and workmanship; jaws and wear parts excluded.
Deutsch