Filter by sub-categories
How to choose a hydraulic breaker for your mini digger
- Impact energy and machine weight. The breaker is chosen on the weight of the mini digger: 180 joules and 70-107 kg for machines from 1 to 2 tonnes, 220 joules for 1.5 to 2.5 tonnes, 240 joules for 1.8 to 3 tonnes, 320 joules and 180 kg for excavators from 2.5 to 5 tonnes. A breaker that is too heavy unbalances the machine and tires the arm; one too light bounces on concrete and breaks chisels. The breaker weight and the machine class are on every product page.
- Hydraulics. The breakers run on 14-45 l/min at 80-120 bar and connect with two 1/2" hoses to the auxiliary line: the flow of the machine's line must sit within the range on the product page, because with too little oil the breaker hits softly and with too much it overheats and wears. The line's figures are in the mini digger's manual; with the make and model we confirm them.
- Standard or silenced. The standard breaker works at 117 dB, the silenced one, with a closed, sound-insulated housing, at 106 dB: a difference you hear, useful on sites in town, in renovations and near houses. For the same energy the silenced version weighs 10 kg more and protects the breaker body better from dust and knocks.
- Chisels, post driver and correct use. Every breaker comes with two chisels, a moil point for concrete and rock and a flat chisel for cutting tarmac and masonry; as options there are flat, pyramid, conical, vertical and horizontal chisels for every size, and the post driver tip, the most requested, which turns the breaker into a post driver for fences, vineyards and orchards. Keep the breaker perpendicular to the surface, never lever with the arm and never blank-fire. Chisels and spares are in stock.
- Fitting and compatibility. The breaker fits in place of the bucket with the pins of its DELEKS® hitch size or with the plate for the machine's quick coupler. The three dimensions to compare are the usual ones: pin diameter, pin centres and inside width of the hitch, listed on every product page; with the same dimensions it fits Kubota, Takeuchi, Bobcat, JCB, Yanmar and other makes too.
- Plate compactors. The hydraulic plate compactor mounts on the dipper like the breaker and compacts trenches, embankments, banks and trench bottoms where a roller or a walk-behind plate cannot go: two sizes, 180 kg with 3 tonnes of force for machines from 1.5 to 3 tonnes and 295 kg with 4 tonnes for 4 to 10 tonnes, 2,000 impacts per minute, 30-75 l/min. Delivered on a pallet by courier; two-year warranty on defects in materials and workmanship, chisels and wear parts excluded.
Frequently asked questions
Which breaker do I need for a 1.5 or 1.8-tonne mini digger?
A 180-220 joule breaker, 95 to 127 kg, running on 14-25 l/min: the range for machines from 1 to 2.5 tonnes. With the make and model we confirm flow and hitch.
How many litres per minute do I need?
From 14-25 for the small breakers to 25-45 for the large ones, at 80-120 bar. The flow of the auxiliary line is in the machine's manual and is the first figure to check.
What is the difference between a standard and a silenced breaker?
The energy is the same; the silenced one has a closed, sound-insulated housing, works at 106 dB instead of 117 and weighs 10 kg more. It is the one for sites in town and for renovations.
Are the chisels included?
Yes, two: moil point and flat. Flat, pyramid, conical, vertical and horizontal chisels and the post driver tip are added as options on each breaker's product page.
Can I drive posts with the breaker?
Yes, with the post driver tip, which fits in place of the chisel: fence, vineyard and orchard posts without digging a hole.
Does the breaker fit a mini digger of another make?
Yes: with the pins of the same hitch size or with the plate for the machine's quick coupler. The dimensions to compare are on every product page.
Which chisel for which job?
Moil point for concrete and rock, flat for tarmac and masonry, pyramid and conical for the hardest material, vertical and horizontal for cuts and chases in their respective directions, post driver for posts.
What is the plate compactor for a mini digger for?
For compacting trenches, embankments, banks and trench bottoms where a roller or a walk-behind plate cannot go, working off the arm of the machine.
How much does a mini digger breaker cost?
Prices are on each product page, with the pallet delivery cost shown in the basket.
What warranty do the breakers have?
Two years on defects in materials and workmanship; chisels and wear parts excluded.
Deutsch