This page needs JavaScript activated to work. Cutter bars for mini excavators, diggers, tractors | DELEKS
FREE SHIPPING ALL OVER AUSTRIA

Estimated deliveries in 15 - 20 days from the day of ordering, shipment operated by DB Schenker - Notification by phone call upon dispatch.

Hydraulic cutter bars and hedge cutters for mini excavators, mini diggers and tractors: single and double-blade bars from 130 to 180 cm (4'3" to 5'11"), disc bars of 100 and 160 cm

Hydraulic cutter bars and hedge cutters for mini diggers, excavators and tractors with a hedge-cutting arm or a hydraulic line, for trimming hedges, topping vineyards and orchards, pruning branches and mowing grass and verges you can only reach with the machine's arm. Single-blade bars of 130, 160 and 180 cm, from 58 to 70 kg, with 17-23 blades, for grass, hedges and branches up to 1-2 cm; double-blade bars in the same widths, for a clean cut on hedges and fine branches up to 1 cm; disc bars of 100 cm with 3 discs and 160 cm with 5 discs, from 58 to 95 kg, for intensive pruning of hedges and branches up to 9 cm (3.5"), also with a piston motor for high flows. Hydraulic motor and 4-hole mounting plate included, from 20 l/min at 140-180 bar for the blade bars; as options the saddle made to measure for your machine or saddles for standard quick couplers, MS01, Morin and the like. Blade bars made in Italy, two-year warranty. Delivered on a pallet by courier, with the cost shown in the basket.

How to choose a cutter bar for your mini digger

  • Single blade, double blade or discs. The single-blade bar is the everyday one: it cuts tall grass, hedges and branches up to 1-2 cm, with the blades working against the fixed comb. The double-blade bar has two opposed blades that move together: a cleaner cut with no tearing on hedges, fine branches up to 1 cm and ornamental plants, where the quality of the cut matters. The disc bar has circular blades over a 100 or 160 cm front and cuts branches up to 9 cm: it is the one for intensive pruning, rejuvenating thick hedges, topping vineyards and orchards and the branches a blade bar will not take.
  • Width and weight. 130 cm for small machines, narrow passages and precision work; 160 and 180 cm to make progress on long hedges, embankments and verges. The blade bars weigh 58 to 70 kg, the disc bars 58 to 95 kg: compare the weight with the machine's lifting capacity at full reach, because the bar often works high and to the side, where the machine lifts less.
  • Hydraulics. The blade bars run from 20 l/min at 140-180 bar, so they go on small mini diggers too; the disc bars need 30 to 90 l/min depending on the version, and those with a piston motor are made for the higher flows of hedge-cutting arms and larger excavators. The flow of the auxiliary line is in the machine's manual and is the figure to compare with the product page; hoses and couplings are chosen to suit the machine's line.
  • Fitting to the machine. Every bar comes with the hydraulic motor and the 4-hole mounting plate; to fit it to the dipper of a mini digger or excavator there are, as options, the saddle made to measure for your machine or the saddles for standard quick couplers, MS01, Morin and the like, and on a tractor the bar goes on the hedge-cutting arm. With the make and model of the machine we point you to the right saddle.
  • Hedges, topping and verges. On a hedge, cut the sides first, vertically from the bottom up, then the top horizontally; the bar moves slowly and steadily, without pushing, because the blades do the cutting, not the arm. In vineyards and orchards, topping is done with the bar vertical along the row; on embankments and verges the bar mows grass where a flail head cannot go. Thick branches are left to the disc bar, which cuts clean and does not fray.
  • Delivery, warranty and spares. The bars travel on a pallet by courier; blades, discs and belts are in stock, hoses are not included because every machine has its own line. Blade bars made in Italy; two-year warranty on defects in materials and workmanship, blades, discs and wear parts excluded.

Frequently asked questions

Which bar do I need for trimming hedges with a mini digger?
For hedges and branches up to 1-2 cm the single-blade bar; for a cleaner cut on ornamental hedges the double-blade bar; for thick hedges and branches up to 9 cm the disc bar. With the make and model we confirm flow and saddle.

What is the difference between a single-blade and a double-blade bar?
The single blade works against a fixed comb and suits grass, hedges and branches up to 1-2 cm; the double blade has two opposed blades, cuts cleaner and without tearing on hedges and fine branches up to 1 cm.

What diameter do they cut?
1-2 cm for single-blade bars, 1 cm for double-blade bars, 9 cm for disc bars.

How many litres per minute do I need?
From 20 l/min for the blade bars, at 140-180 bar; 30 to 90 l/min for the disc bars depending on the version. The flow of the auxiliary line is in the machine's manual.

Does the bar fit a mini digger of another make?
Yes: with the saddle made to measure for the machine or with the saddle for standard quick couplers, MS01, Morin and the like, added as options. With the make and model we point you to the right one.

Can I fit it to the hedge-cutting arm of a tractor?
Yes: the bars are also made for hedge-cutting arms and hydraulic hedge trimmers; you need a hydraulic line within the bar's flow range.

Does it mow grass too?
Yes, the blade bars mow tall grass on embankments, verges and under fences, where a flail head cannot go.

Are the bars made in Italy?
Yes, the single and double-blade bars are built in Italy, with a two-year warranty.

How much does a cutter bar for a mini digger cost?
Prices are on each product page, with the pallet delivery cost shown in the basket.

What warranty do the bars have?
Two years on defects in materials and workmanship; blades, discs and wear parts excluded.

What our customers say about us