This page needs JavaScript activated to work. Verge flail mowers for tractors 100-220 cm, 20-130 hp
FREE SHIPPING ALL OVER AUSTRIA

Estimated deliveries in 15 - 20 days from the day of ordering, shipment operated by DB Schenker - Notification by phone call upon dispatch.

Verge and ditch bank flail mowers for tractors, 100 to 220 cm (39 to 87 in), offset with hydraulic arm

Verge and ditch bank flail mowers for tractors from 100 to 220 cm (39 to 87 in) wide and 160 to 815 kg (353 to 1,797 lb), for tractors from 20 to 130 hp: offset flail mowers with a hydraulic arm that moves the head out beside the tractor and tilts it from +90° to -60°, to mow ditches, banks, embankments, roadside verges and low hedges without taking the wheels off the level. Four weight and power bands: from the verge mower for compact tractors, 100 to 165 cm (39 to 65 in) with 330 g (11.6 oz) hammers and branches up to 3 cm (1.2 in), to the 180 to 220 cm (71 to 87 in) models with 1,100 g (39 oz) hammers and branches up to 5 cm (2 in) for tractors from 80 to 130 hp. In the central position they work as a normal tractor flail mower. Every mower comes with its PTO shaft, a 2-year warranty and free delivery within the EU. Several machines in this category are Made in Italy, built by DELEKS, others are TÜV certified: origin and certifications are shown on each product page.

Available
Working width: 1000.0 mm
Weight: 160.0 kg
Tractor Power Range: 25-45 hp
Available
Working width: 1200.0 mm
Weight: 180.0 kg
Tractor Power Range: 25 - 45 Hp
Not available  Notify me
Working width: 1400.0 mm
Weight: 200.0 kg
Tractor Power Range: 30 - 45 Hp
Not available  Notify me
Working width: 1694.0 mm
Weight: 322.0 kg
Tractor Power Range: 35 - 55 Hp
Available
-199,00€ 2.850,00€VAT incl.
Working width: 1300.0 mm
Weight: 452.0 kg
Tractor Power Range: 40 - 70 Hp
Available
-324,00€ 4.625,00€VAT incl.
Working width: 1795.0 mm
Weight: 750.0 kg
Tractor Power Range: 80 - 130 Hp

How a verge flail mower works

The hydraulic arm, controlled by the tractor's spool valves, moves the head sideways beyond the tractor's outline and tilts it down to -60° for ditches or up to +90° for banks and hedges. The tractor stays on the road or the field edge, on level, safe ground, and the mower works where the wheels cannot go. Brought back to the central position, it mows behind the tractor like a standard flail mower.

Which model for your tractor

100 to 165 cm (39 to 65 in) and 160 to 322 kg (353 to 710 lb) for tractors from 20 to 55 hp: the verge mower for compact tractors, with 330 g (11.6 oz) hammers. 130 to 180 cm (51 to 71 in) and 450 to 505 kg (992 to 1,113 lb) for tractors from 40 to 70 hp, with heavier hammers for prunings and brambles. 140 to 220 cm (55 to 87 in) and 540 to 720 kg (1,190 to 1,587 lb) for tractors from 50 to 110 hp. 180 to 220 cm (71 to 87 in) and 750 to 815 kg (1,653 to 1,797 lb), with 1,100 g (39 oz) hammers, for tractors from 80 to 130 hp: the verge mower for roadsides and watercourses for councils, drainage boards and contractors.

Verge mower, hedge cutter arm or flail head for a digger

The verge flail mower has limited reach but works fast and covers long stretches of ditch. The hedge cutter arm reaches 3.70 m (12 ft 2 in) in height and looks after hedges and steep banks with a flail head or finger bar. The flail head for a mini digger or mini excavator works on rough banks where even the tractor cannot go.

Frequently asked questions

What is a giraffe mower?
It is the everyday name for the verge flail mower with an arm: the head swings out to the side and tilts, like a giraffe's neck, to reach ditches and banks.

How many horsepower does it need?
From 20 to 25 hp for the 100 cm (39 in) models up to 130 hp for the 220 cm (87 in) ones. Weight matters too: offset to the side it affects stability, and lighter tractors need ballast on the opposite side.

How far does the head tilt?
From +90°, vertical upwards for hedges and banks, to -60° downwards for ditches and embankments.

How is the arm controlled?
With the tractor's double-acting spool valves, which operate the side shift and the head tilt.

Does it cut branches too?
Up to 3 cm (1.2 in) on the light models and up to 5 cm (2 in) on those with 1,100 g (39 oz) hammers. For woody hedges and thick branches there are the disc saw bars on the hedge cutter arms.

Can it be used as a normal flail mower?
Yes: brought back to the central position it works behind the tractor like a standard flail mower.

Which tractors is it compatible with?
Compact and orchard tractors from 20 hp upwards (Kubota, Iseki, Yanmar, Carraro, Goldoni, Solis and similar) for the light models; tractors from 50 to 130 hp for the heavy ones.

Delivery and warranty?
2-year warranty and free delivery within the EU on a pallet, with a phone call before delivery.

What our customers say about us