Filter by sub-categories
Finger bar hedge cutter
The single-blade bar with counter-blade, from 130 to 180 cm (51 to 71 in) and 58 to 70 kg (128 to 154 lb), cuts hedges and small branches up to 3 cm (1.2 in) and is the one most used on arms and mini diggers for verges, banks and rows; it is not suited to grass. The double-blade bar, in the same sizes, cuts hedges and grass, with branches up to 2 cm (0.8 in): of the finger bars it is the only one suited to grass. The single-blade bar comes with two hydraulic motors, 50 cc for mini diggers and mini excavators of 1.3 to 1.8 tonnes and 100 cc for those of 1.8 to 2.5 tonnes; the double-blade bar has the 50 cc motor. The weight ranges are a guide: what counts is the machine's oil flow, to be checked before ordering.
Disc saw bar
Three 400 mm (16 in) discs for the 100 cm (39 in) bar, 58 or 60 kg (128 or 132 lb), and five for the 160 cm (63 in) bar, 86 or 95 kg (190 or 209 lb), with 60 or 72 tungsten-carbide teeth per disc, depending on the model: they cut branches up to 9 cm (3.5 in) in diameter, clean and without splitting, for pruning woody hedges, roadside trees and woodland edges and for topping orchards and vineyards. Available with two types of hydraulic motor, gear and piston, the latter for circuits with higher pressures.
Where they mount
On hedge cutter arms that take the bars, on tractor hedge cutter arms and on mini diggers and mini excavators, with the 4-hole plate adapted to the machine's mounting and the hoses connected to the auxiliary hydraulic line. On a tractor a hydraulic arm is needed: the bar does not connect directly to the linkage.
Frequently asked questions
Finger bar or disc saw bar?
The finger bar for hedges and small branches up to 3 cm (1.2 in), with a clean, fast cut; the disc saw bar for branches up to 9 cm (3.5 in), pruning and topping.
Does it fit a mini digger?
Yes, with the 4-hole plate and the excavator's auxiliary hydraulic line. For the finger bars the motor is chosen according to the oil flow: 50 cc for mini diggers of 1.3 to 1.8 tonnes, 100 cc for those of 1.8 to 2.5 tonnes, as a guide.
Does it fit a tractor?
It needs a hydraulic arm, such as the hedge cutter arms in the catalogue: the bar does not mount directly on the three-point linkage.
What diameter does it cut?
Up to 3 cm (1.2 in) for the single-blade bar, up to 2 cm (0.8 in) for the double-blade bar, up to 9 cm (3.5 in) for the disc saw bars.
Single or double blade?
Double for hedges and grass, with branches up to 2 cm (0.8 in): it is the only finger bar suited to grass; single with counter-blade for hedges and small branches up to 3 cm (1.2 in), verges and banks.
How much do they weigh?
58 to 70 kg (128 to 154 lb) for the finger bars, 58 to 95 kg (128 to 209 lb) for the disc saw bars: weights that suit small arms and mini diggers too.
Can the discs and blades be replaced?
Yes: 400 mm (16 in) discs with 60 or 72 tungsten-carbide teeth, blades and counter-blades are available as spares.
Delivery and warranty?
2-year warranty and free delivery within the EU, with a phone call before delivery.
Deutsch