Filter by sub-categories
Blade deck or chain topper
Blades give a clean, even cut: lawns, gardens, parks and orchards with regular grass. Chains stand up to stones, twigs and uneven ground and tear the growth rather than cutting it: the result is cleared ground, not a finished lawn. The 100 and 120 cm (39 and 47 in) chain topper works with tractors from 25 to 75 hp. On the 100 and 120 cm (39 and 47 in) deck, blades and chains are interchangeable: a blade deck can take the optional chains, and a chain topper can take the blades.
100-120 cm (39-47 in) deck and 3-blade deck
The 100 and 120 cm (39 and 47 in) deck, 85 to 120 kg (187 to 265 lb), is the mower for compact tractors from 12 to 40 hp, with a 10 to 60 mm (0.4 to 2.4 in) cut: it has a central rotor that carries two pairs of blades, one above the other, at two opposite points, which cut each stem of grass into three; chains can be fitted in place of the blades. It mounts at the rear or the front of the tractor. The 3-blade deck, 120 to 180 cm (47 to 71 in) and 140 to 205 kg (309 to 452 lb), for tractors from 12 to 50 hp, has three rotors with one blade each, as long as the full cutting diameter and weighing 920 to 1,320 g (32 to 47 oz) depending on the size, and a 5 to 50 mm (0.2 to 2 in) cut: it covers more ground and leaves a more even lawn, for parks, sports grounds and orchards.
Inter-row disc for vineyards and orchards
The deck with inter-row disc pairs a 150 or 180 cm (59 or 71 in) deck, with hydraulic offset, with a side disc that mows the grass between one plant and the next in the row and retracts in front of the trunk: one pass clears the whole inter-row, with no brushcutter work by hand. The central body has three rotors with 2 blades each, and the inter-row disc has one rotor with 2 blades. Overall width 200 to 230 cm (79 to 91 in), for tractors from 18 to 55 hp.
Frequently asked questions
Finishing mower or flail mower?
The finishing mower cuts with blades and leaves a finished lawn; the flail mower breaks up long grass, brambles and branches with hammers. For a lawn to keep short and tidy you need the finishing mower.
Which deck for a 20 hp tractor?
The mower deck at 100 to 120 cm (39 to 47 in) or the 3-blade deck at 120 cm (47 in), both from 12 hp; the wider decks from 25 hp upwards.
What are the chains?
In place of the blades, steel chains spin and tear the growth: ideal for stones, rough ground and scrub, where blades would get damaged. Standard on the chain topper, optional on the 100 and 120 cm (39 and 47 in) deck: blades and chains are interchangeable.
Does it mulch?
As standard, discharge is to the rear. On the 3-blade decks from 120 to 180 cm (47 to 71 in) the optional mulching kit chops the grass and leaves it on the lawn as natural fertiliser; there is no collection.
What is the cutting height?
10 to 60 mm (0.4 to 2.4 in) on the 100 and 120 cm (39 and 47 in) deck, adjusted on the skids; 5 to 50 mm (0.2 to 2 in) on the 3-blade deck, adjusted on the support wheels.
Can it be mounted on the front of the tractor?
Yes, the 100 and 120 cm (39 and 47 in) deck is reversible: it also works as a front mower, on reverse-drive tractors or on tractors with a front linkage and a 540 rpm front PTO.
What is the inter-row disc?
A rotating side disc that mows the grass between the plants in the row and retracts when it meets the trunk; it is fitted to the deck with hydraulic offset.
Is the PTO shaft included?
Yes, with a free-wheel that protects the tractor's transmission when the blades keep spinning under their own momentum.
Deutsch