Filter by sub-categories
Which head for your mini digger
For mini diggers from 0.8 to 1.8 tonnes, the Y-blade heads from 60 to 100 cm (24 to 39 in), 66 to 93 kg (146 to 205 lb), light enough not to unbalance the boom. For machines from 1 to 2 tonnes, the 60 to 110 cm (24 to 43 in) heads with a reinforced rotor, 76 to 120 kg (168 to 265 lb), and branches up to 3 cm (1.2 in). For excavators from 2 to 5 tonnes, the 80 cm (31 in) hammer head, 215 kg (474 lb), with branches up to 4 cm (1.6 in); for those from 5 to 8 tonnes, the hammer heads from 80 to 120 cm (31 to 47 in), 150 to 195 kg (331 to 430 lb), with branches up to 4 cm (1.6 in); for those from 5 to 10 tonnes, the heavy hammer heads from 80 to 120 cm (31 to 47 in), 270 to 320 kg (595 to 705 lb), with branches up to 5 cm (2 in). Always compare the weight of the head with the boom's lift capacity at full reach.
Hydraulic connection: what you need
The head mounts on the dipper in place of the bucket and connects to the excavator's auxiliary hydraulic line, with a double-acting pedal control; some heads also need a case drain line for the hydraulic motor, the third hose: it is stated on each product page. Before ordering, check the flow and pressure of the auxiliary circuit and the boom's mounting, so the right bracket can be supplied.
Y-blades or hammers
Y-blades are light, draw little hydraulic power and cut grass, brambles, reeds and branches up to 2 to 3 cm (0.8 to 1.2 in) well: they are the tool for the heads on small mini diggers. Hammers have more mass and shred branches up to 4 to 5 cm (1.6 to 2 in), scrub and suckers: they equip the heads for excavators of 2 tonnes and over, the true excavator mulchers.
Frequently asked questions
Which flail head for a 1.5 tonne mini digger?
A Y-blade head from 60 to 100 cm (24 to 39 in), 66 to 93 kg (146 to 205 lb), or a reinforced-rotor head of 100 to 110 cm (39 to 43 in); choose the width with the boom's lift capacity in mind too.
What hydraulic flow does it need?
It depends on the model and the hydraulic motor: tell us your excavator model and the flow of the auxiliary line before ordering, so we can check the match.
Does it need a case drain line?
It depends on the head: on some, the hydraulic motor has a separate drain that must go back to the tank through the case drain line, the third hose; others work with just the two hoses. It is stated on each product page.
Does it cut branches?
Up to 2 to 3 cm (0.8 to 1.2 in) with Y-blades and up to 4 to 5 cm (1.6 to 2 in) with hammers; for thick branches on an excavator there are the disc saw bars.
Can it be used on a 5 to 7 tonne excavator?
Yes: the hammer heads of 150 to 195 kg (331 to 430 lb) are made for excavators from 5 to 8 tonnes, the heavy ones of 270 to 320 kg (595 to 705 lb) for excavators from 5 to 10 tonnes.
How does it differ from a forestry mulcher for tractors?
The tractor forestry mulcher, in the heavy-duty series, shreds branches up to 15 cm (6 in) off the PTO; the excavator head is hydraulic, goes up to 5 cm (2 in) and works on banks and slopes where the tractor cannot go.
How is it fitted?
In place of the bucket, with the bracket or pins to suit your excavator's dipper, and with the hoses connected to the auxiliary line.
Delivery and warranty?
2-year warranty and free delivery within the EU on a pallet, with a phone call before delivery.
Deutsch